Allied Telesis AT-GS950/48 - Manual (Page 369)

AT-GS950/48 Web Interface User Guide
369
Figure 151. Factory Default Reset/Reboot Page with Password Entry
5. Enter the same password that you defined when you previously set the
Factory Default Reset field to Disable.
6. Click Apply.
The initial Factory Default Reset/Reboot Page is displayed with the
Factory Default Reset field Enabled. See Figure 148 on page 362.
In the Reboot section, the Reboot Type field now includes the options
presented in its pull-down menu for returning the switch configuration
to the factory default values. See “Configure Factory Default Values”
on page 364 for more information.
7. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.