Allied Telesis AT-GS950/48 - Manual (Page 295)

AT-GS950/48 Web Interface User Guide
295
3. Enter the TACACS+ server’s IP address using one of the Server IP
Address fields:
For an IPv4 address, click IPv4, then enter the address using
xxx.xxx.xxx.xxx format.
For an IPv6 address, click IPv6, then enter the address using
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx hexadecimal format.
4. Type the port number in the Server Port field that you want to assign
to TCP.
You may only assign one port number to this parameter.
5. Type the timeout interval, in seconds, for the TACACS+ server in the
Timeout field. This parameters determines the interval that the switch
waits for responses from the TACACS+ server before declaring a
timeout.
6. To specify the server’s encryption key, enter the encryption key in the
Shared Secret field.
7. Click Apply to save your changes.
8. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.