Allied Telesis AT-GS950/48 - Manual (Page 402)

Appendix B: AT-GS950/48 Default Parameters
402
Notify View Name ReadWrite -
Security Model v1 v1/v2c/v3
Security Level
NoAuthNoPriv NoAuthNoPriv/AuthNoPriv/AuthPriv
SNMP User/Group
User Name none 1 - 32 characters
Group Name
none 1 - 32 characters
SNMP Version v1 v1/v2c/v3
encrypted not checked not checked/checked
Auth-Protocol MD5 MD5/SHA
Password none -
Priv-Protocol DES DES/none
Password none -
SNMP/Community Table
Community Name
none 1 - 32 characters
User Name (View
Policy) none 1 - 32 characters
SNMP/Trap Management
Trap Enabled Enabled/Disabled
Host IP Address
none IPv4 address in xxx.xxx.xxx.xxx format /
IPv6 address in
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx format
SNMP Version v1 v1/v2c/v3NoAuthNoPriv/v3AuthNoPriv/
v3AuthPriv
Community Name/
User Name none 1 - 32 characters
Access Control Configuration
Policy Index none 1 - 65535
Source MAC Address none xx:xx:xx:xx:xx:xx hex format
Table 10. AT-S116 Management Software Default Settings (Continued)
Parameter
AT-GS950/48
Default Setting
Specifications