Allied Telesis AT-S95 CLI - Manual (Page 70)

Page 70
Allied Telesis
AT-S95 Management Software CLI User’s Guide
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following examples display dynamic addresses in currently locked ports.
The following example displays dynamic addresses in currently locked port 1/e1.
console# show ports security addresses
Port Status Learning Current Maximum
---- -------- -------- ------- -------
1/e1 Disabled Lock - 1
1/e2 Disabled Lock - 1
1/e3 Enabled Max-addresses 0 1
1/e4 Port is a member in port-channel ch1
1/e5 Disabled Lock - 1
1/e6 Enabled Max-addresses 0 10
ch1 Enabled Max-addresses 0 50
ch2 Enabled Max-addresses 0 128
console# show ports security addresses ethernet 1/e1
Port Status Learning Current Maximum
---- -------- -------- ------- -------
1/e1 Disabled Lock - 1