Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 16)

AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE Page 16 of 124
Starting from SNMPc
Note - SNMPv3: In order to start Device Manager in SNMPv3 mode, the node's Read/Write
Access Mode attribute should be set to SNMP V3 No-Auth, SNMP V3 Auth-MD5, SNMP V3
Auth-SHA , SNMP V3 Priv Auth-MD5, or SNMP V3 Priv Auth-SHA, depending on the SNMPv3
settings configured on the target device.
2.2.2 Starting From HP OpenView Network Node Manager
To start Device Manager from HP OpenView, select a node on the map window,
then select AlliedView-EMS Device Manager from the Tools menu.
Note that Device Manager and HP OpenView run independently of each other, so exiting
HP OpenView has no effect on Device Manager. Device Manager continues to run even
after HP OpenView stops running. To exit Device Manager, select Exit from its File menu.