Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 90)

AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE Page 90 of 124
RMON Options tab (Statistics)
7.2.7.1 Polling Interval
You can change the polling interval here.
7.2.7.2 Display Data Type of Chart
Specifies how to display data on the graph or chart. You can select one from the following
options.
Absolute Value
Displays a value as it is.
Per Sample
Displays the change in the value between the two pollings. This is Current value -
Previous value.
Per Second
Displays the change in the value per second. This is (Current value - Previous value)/
Polling Interval.
Note - Calculated values are rounded. For example, Number of Error packets is usually very
small so that calculated value is likely to be zero.