Allied Telesis AlliedView-EMS 4.0.2 Device-Manager - Manual (Page 57)

AlliedView™-EMS 4.0.2 DEVICE MANAGER USER’S GUIDE Page 57 of 124
Note - It takes times to get values for many variables. To improve
performance, you can limit the number of variables to be displayed to about
10. You can further improve performance by increasing the polling interval
when the volume of the data is high.
MIB display
MIB set
Sets a value for the MIB variable. Specify a variable and a value to set. You
must specify the variable with an instance number. For example, 'sysDescr.0'
or rptrMonitorPortEntry.1.8' are valid examples. If you specify a variable
without an instance such as 'sysDescr', the set operation cannot be
performed.
Note - The MIB set operation changes the data structure in the device's
SNMP agent. Take care when using this function.