Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 40)

Chapter 2: Installing the Hardware
40
Unpacking a Switch
To unpack a switch, perform the following procedure:
1. Remove all the components from the shipping packages.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Make sure the following components are included in your switch
package. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
 One AT-9400 Gigabit Ethernet Switch
 Two rack-mount brackets
 Eight flathead Phillips rack-mount bracket screws
 AC power cord (AC switches only; Americas, EU, Australia, and
UK only)
 AC power cord retaining clip (AC switches only)
 Management cable for local management
 Documentation CD