Allied Telesis AT-9448Ts/XP (Basic Layer 3) - Manual (Page 9)

9
Preface
This guide explains how to build an AT-9400Ts Stack of the AT-9424Ts,
AT-9424Ts/XP, and AT-9448Ts/XP Basic Layer 3 Gigabit Ethernet
Switches. This preface contains the following sections:
 “Product Documentation” on page 10
 “Where to Go First” on page 11
 “Starting a Management Session” on page 11
 “Safety Symbols Used in this Document” on page 12
 “Contacting Allied Telesis” on page 13
Note
For instructions on how to install the switches as stand-alone units,
refer to the AT-9400 Gigabit Ethernet Switch Installation Guide.