Allied Telesis AT-PWR3101 - Manual (Page 35)

AT-RPS3104 and AT-PWR3101 Installation Guide
35
4. If you are not replacing the failed module with a new AT-PWR3101
module, reinstall the blank faceplate over the empty expansion slot
(see Figure 25). A slot should not be left open. The blank faceplate
keeps dust from entering the system and helps ensure proper cooling
and airflow in the chassis.
Figure 25. Reinstalling a Blank Faceplate
5. Remove the new AT-PWR3101 module from its shipping container.
Retain the shipping material. You must use the original shipping
material if you need to return the product to Allied Telesyn.
6. Refer to “Verifying Package Contents” on page 17 to verify that the
package contains the appropriate items.
STATUS
AT-PW
R3101
POWER
FAUL
T