Allied Telesis AT-S99 - Manual (Page 111)

AT-S73 and AT-S99 Management Software User’s Guide
111
3. Click the Port Configuration tab, shown in Figure 38.
Figure 38. 10/100Base-TX Port on the Management Card
4. To adjust the settings of the port, click Edit to display the Port
Configuration pop-up window.
5. Adjust the parameters as needed. The parameters are defined in
Table 11 on page 109.
6. To save your changes in the master configuration file, select the Files
tab in the Configuration window and click Save System
Configuration and All Cards Configurations and Apply.