Allied Telesis AT-S99 - Manual (Page 112)

Chapter 4: Configuring the AT-CV5M02 Management Card
112
Restoring the Default Setting on the 10/100Base-TX Port
These procedures are used to restore the default setting of Auto-
Negotiation on the 10/100Base-TX port on the AT-CV5M02 Management
Card. The procedures do not interrupt the network operations of the media
converter line cards in the chassis.
Note
The 10/100Base-TX port has a wiring configuration of MDI. This is
not adjustable.
Menus
To restore the default setting of Auto-Negotiation on the 10/100Base-TX
port from the menus:
1. From the Main Menu, select Module Status and Configuration.
2. Select the AT-CV5M02 Management Card in the menu to display the
Module Configuration Menu shown in Figure 34 on page 107.
3. Select the Return Management Card Port Configuration to Default
option.
4. To save your changes in the master configuration file, go to the Main
Menu and select Configuration to display the Configuration menu and
select Save System and All Line Card Configurations.
Web Browser
To restore the default setting of Auto-Negotiation on the 10/100Base-TX
port from the web browser windows:
1. Select Module Status and Configuration from the menu bar.
2. In the Chassis View, click the 10/100Base-TX port on the AT-CV5M02
Management Card. Alternatively, select the Menu View tab and click
the name of the management card. The Port A tab for the
management card is shown in Figure 37 on page 110.
3. Select the General tab, shown in Figure 27 on page 97.
4. Click Return Management Card Port Configuration to Default
Setting.
5. To save your changes in the master configuration file, select the Files
tab in the Configuration window and click Save System
Configuration and All Cards Configurations and Apply.