Figure 24. system tab – Allied Telesis AT-S99 User Manual
Page 83
AT-S73 and AT-S99 Management Software User’s Guide
83
Figure 23. System Tab
3. Click Edit in the IP Parameters section of the window to display the IP
Parameters pop-up window.
4. To assign a static IP address configuration to the card, enter the
desired values in the IP Address, Subnet Mask, and Gateway
Address fields. Here are the guidelines for entering a static IP address
configuration:
The values have to be entered in this format: xxx.xxx.xxx.xxx.
The DHCP client has to be disabled.
To delete a value without assigning a new value, enter 0.0.0.0.
The IP address configuration has to include a default gateway
address if the management card will be communicating with
network devices, like a TFTP server or syslog server, that are
located on a different subnet. This address should specify the first