Allied Telesis AT-S97 - Manual (Page 126)

Chapter 8: Event Log and Syslog Client Commands
126
LOGGING DISABLE SYSLOG
Syntax
logging disable syslog
Parameters
None.
Privilege Levels
Administrator and read-write
Description
This command stops the management module from transmitting events to
a syslog server by disabling the syslog client. This is the default state of
the client. To display the current state of the syslog client, refer to
“LOGGING SHOW” on page 132.
Example
The following command disables the syslog client:
logging disable syslog