Allied Telesis AT-S97 - Manual (Page 127)

AT-S85 and AT-S97 Management Software Command Line Interface User’s Guide
127
LOGGING ENABLE EVENTLOG
Syntax
logging enable eventlog
Parameters
None.
Privilege Levels
Administrator and read-write
Description
This command activates the event log. The management module
immediately begins to store the events as they are generated by the
modules in the chassis. This is the log’s default setting. To display the
log’s current state, refer to “LOGGING SHOW” on page 132.
Example
The following command enables the event log:
logging enable eventlog