Allied Telesis AT-S70 - Manual (Page 27)

27
Chapter 3
Basic Parameters
This chapter provides basic setup procedures for your Converteon™
Series chassis and contains the following sections:
ˆ “When Does a Converteon™ Chassis Need an IP Address?” on
page 28
ˆ “Saving the Configuration Settings” on page 29
ˆ “Configuring Basic Chassis Parameters” on page 30
ˆ “Configuring the Chassis Temperature Threshold” on page 37
ˆ “Pinging a Remote System” on page 38
ˆ “Restarting the Line Cards” on page 40
ˆ “Setting the RS-232 Terminal Baud Rate” on page 42