Allied Telesis AT-S70 - Manual (Page 72)

Chapter 5: Working with Line Cards
72
Working with the AT-CM70S Line Card
The following sections describe operations related to the AT-CM70 line
card:
ˆ “Displaying Status Information,” next
ˆ “Configuring the Local Console Settings” on page 74
ˆ “Configuring the T1/E1 Port Settings” on page 75
Displaying Status
Information
To view the status information an AT-CM70S line card, perform the
following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu is displayed, as shown in
Figure 12 on page 53.
2. Select the AT-CM70S line card whose information you want to display.
3. Press <Return>.
An example of the Module Configuration Menu for the AT-CM70S line
card is shown in Figure 13 on page 55.
Figure 22. Module Configuration Menu (AT-CM70S Line Card)
The Module Configuration Menu items and options are described
below:
Module
Displays the model number of line card.
Module Configuration Menu
Module 15
Module: AT-CM70S
Port Link Speed Mode
A(100BaseSFP) Offline -- --
B(100BaseTX) Offline -- --
Configure Operating Mode
Display DIP Switch Setting
TDM LIU (T1/E1) Configuration Manufacture T1 Mode
Return to Module Status and Configuration ...