Allied Telesis AT-S70 - Manual (Page 110)

Chapter 8: Operations, Administration, and Maintenance (OAM)
110
The OAM Loopback Test Menu, shown in Figure 49 on page 108, is
displayed.
8. From the OAM Loopback Test Menu, select Show Loopback Test
Statistics to display the current loopback test statistics, or select
Clear Loopback Test Statistics to clear all current loopback test
statistics.
If Show Loopback Test Statistics is selected, the Show Loopback Test
Menu, shown in Figure 50, is displayed showing the current loopback
test statistics.
Figure 50. Show Loopback Test Statistics Menu
9. Press <Esc> or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.
Show Loopback Test Statistics
Module = 5, Port = 1
Number of Seconds 0
Number of Tx Frames 0
Number of Rx Frames 0
Number of Rx Errored Frames 0
Number of Tx Bytes 0
Number of Rx Bytes 0
Number of Rx Errored Bytes 0
Number of Tx Bits 0
Number of Rx Bits 0
Number of Rx Errored Bits 0