Allied Telesis AT-S70 - Manual (Page 85)

AT-S70 Management Software User’s Guide
85
Ingress_Rate_Limit
This parameter allows the user to configure the ingress rate limit on the
selected port. The default value is Ingress_Rate_Limit_No.
Figure 37. Port Egress Rate Menu
Egress_Rate_Limit
This parameter allows the user to configure the egress rate limit on the
selected port. The default values is Egress_Rate_Limit_No.
8. Press <Esc> or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.
Port Egress Rate Menu
Converteon
> Egress_Rate_Limit_No
Egress_Rate_Limit_128K
Egress_Rate_Limit_256K
Egress_Rate_Limit_512K
Egress_Rate_Limit_1M
Egress_Rate_Limit_2M
Egress_Rate_Limit_4M
Egress_Rate_Limit_8M
Return to Port Configuration Menu ...