Configuring oam operations, Figure 41. module status and configuration menu – Allied Telesis AT-S70 User Manual
Page 94
Chapter 8: Operations, Administration, and Maintenance (OAM)
94
Configuring OAM Operations
To configure the OAM operations, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, shown in Figure 41, is
displayed.
Figure 41. Module Status and Configuration Menu
2. Select a line card on which you want to configure.
3. Press <Return>.
The Module Configuration Menu, shown in Figure 42 on page 95, is
displayed.
Module Status and Configuration
Converteon
Module
Status
Link(A)
Link(B)
OpMode
1: AT-CV5M01
On
Online/100
2: AT-CM202
On
Online/100
Offline
OAM Visible
3: AT-CM202
On
Online/100
Offline
OAM Visible
4: AT-CM202
On
Online/100
Online/10
OAM Visible
5:(Not Inserted)
--
--
--
--
6: AT-CM212A/1
On
Online/100
Online/100
Link Test
7: AT-CM212A/1
On
Online/100
Offline
Link Test
8: AT-CM212B/1
On
Online/100
Online/100
SML
9: AT-CM212B/1
On
Online/100
Online/100
SML
10:(Not Inserted)
--
--
--
--
11: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
12: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
13: AT-CV1KSS
On
Online/1000
Offline
Link Test
14: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
15:(Not Inserted)
--
--
--
--
16: AT-CV102
On
Online/100
Online/1000
Link Test
More ...
Return to Main Menu ...