Allied Telesis AT-S70 - Manual (Page 44)

Chapter 4: Basic Parameters
44
The Ping window, shown in Figure 9, is displayed.
Figure 9. Ping Window
3. Enter the Station IP Address of the end-node you want the chassis to
ping.
4. Press <Return>.
The Omega interface activates the Activity Monitor window. This
window reports the results of the Ping command.
A ping command performed from a local or remote Omega session
continues until you press any key to stop it.
5. Press <Esc> or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.
Converteon
Please enter Station IP Address to ping:
->