Allied Telesis AT-S70 - Manual (Page 128)

Chapter 9: File Downloads and Uploads
128
6. Enter the filename of the configuration file that is to be stored as on the
TFTP server.
7. Press <Return>.
Once the filename has been specified, the prompt, shown in Figure 72,
is displayed.
Figure 72. TFTP - Configuration File Download Confirmation Prompt
8. Type Y for to start the download.
The prompt, shown in Figure 73, is displayed.
Figure 73. TFTP - Configuration File Downloading Prompt
9. Begin the configuration file transfer.
After the system has downloaded the new configuration file, it reboots
the system and begins to initialize the software. The system does not
forward any network traffic during the initialization process.
Note
Wait until the software is initialized before you attempt to reestablish
your management session.
Converteon
Ready to download configuration file through TFTP.
Warning: During Download Configuration Management
activity is disabled.
Do TFTP download now? (Yes or No):
Downloading Configuration file through TFTP, please wait
...