Allied Telesis AT-S62 - Manual (Page 107)

Section I: Basic Operations 107
Chapter 6
SNMPv2 and SNMPv2c Commands
This chapter contains the following commands:
ˆ “ADD SNMP COMMUNITY” on page 108
ˆ “CREATE SNMP COMMUNITY” on page 109
ˆ “DELETE SNMP COMMUNITY” on page 112
ˆ “DESTROY SNMP COMMUNITY” on page 113
ˆ “DISABLE SNMP” on page 114
ˆ “DISABLE SNMP AUTHENTICATETRAP” on page 115
ˆ “DISABLE SNMP COMMUNITY” on page 116
ˆ “ENABLE SNMP” on page 117
ˆ “ENABLE SNMP AUTHENTICATETRAP” on page 118
ˆ “ENABLE SNMP COMMUNITY” on page 119
ˆ “SET SNMP COMMUNITY” on page 120
ˆ “SHOW SNMP” on page 122
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information, refer to Chapter 5, “SNMPv1 and
SNMPv2c” in the AT-S62 Management Software Menus Interface
User’s Guide.