Allied Telesis AT-S62 - Manual (Page 553)

553
Chapter 31
802.1x Port-based Network Access
Control Commands
This chapter contains the following commands:
ˆ “DISABLE PORTACCESS|PORTAUTH” on page 554
ˆ “DISABLE RADIUSACCOUNTING” on page 555
ˆ “ENABLE PORTACCESS|PORTAUTH” on page 556
ˆ “ENABLE RADIUSACCOUNTING” on page 557
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=AUTHENTICATOR”
on page 558
ˆ “SET PORTACCESS|PORTAUTH PORT ROLE=SUPPLICANT” on
page 566
ˆ “SET RADIUSACCOUNTING” on page 568
ˆ “SHOW PORTACCESS|PORTAUTH” on page 570
ˆ “SHOW PORTACCESS|PORTAUTH PORT” on page 572
ˆ “SHOW RADIUSACCOUNTING” on page 575
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information, refer to Chapter 29, “802.1x Port-based
Network Access Control” in the AT-S62 Management Software
Menus Interface User’s Guide.