Allied Telesis AT-S62 - Manual (Page 208)

Chapter 12: File System Commands
208 Section II: Advanced Operations
SHOW FILE
Syntax
show file[=“ filename.ext ”]
Parameter
file Specifies the name of the file to be displayed. If the
file name contains spaces, enclose it in double
quotes. Otherwise, the quotes are optional.
If you do not specify a file name, the command
displays the names of all the files in the file system.
Description
This command displays a list of the files in the switch’s file system. You
can use the wildcard “*” to replace any part of the filename to allow a more
selective display.
You can also use this command to view the contents of a configuration
file.
Examples
The following command displays all the files in the switch’s file system:
show file
The following command displays all the configuration files in the file
system:
show file=*.cfg
The following command displays the contents of the configuration file
sw12.cfg in the switch’s file system:
show file=sw12.cfg