Allied Telesis AT-S70 - Manual (Page 127)

AT-S70 Management Software User’s Guide
127
Uploading
Configuration
Files
To upload a new AT-S70 software configuration file onto a chassis from a
local management session using TFTP, perform the following procedure:
Note
Uploading a configuration file will NOT interrupt traffic.
1. Establish a local management session on the chassis where you
intend to download the new management software.
2. From the Main Menu, select Administration.
The Administration Menu, as shown in Figure 46 on page 117, is
displayed.
3. From the Administration Menu, select Upload Configuration
Through TFTP.
The following screen is displayed, as shown in Figure 65.
Figure 65. TFTP - Upload Configuration File Window
4. Enter the IP address of the TFTP server.
5. Press <Return>.
The following screen is displayed, as shown in Figure 66.
Figure 66. TFTP - Enter Configuration File Name Window
6. Enter the filename of the configuration file that is to be stored as on the
TFTP server.
7. Press <Return>.
TFTP Server IP Address-> _
Configuration File Name-> _