Allied Telesis AT-S70 - Manual (Page 23)

AT-S70 Management Software User’s Guide
23
To make a selection, refer to “Using the Terminal Interface” on
page 20.
Press <Esc> or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.
Quitting from a
Local
Management
Session
To end a local management session, return to the Main Menu and type Q
for Quit.
You should always exit from a management session when you are finished
managing a chassis. This can prevent unauthorized individuals from
making changes to the configuration of a chassis would you leave your
management workstation unattended.
Note
You cannot operate both a local management session and a Telnet
management session on the same chassis simultaneously. You
cannot have any number of Telnet sessions running if there is a local
session running.Failure to properly exit from a local or Telnet
management session may block future management sessions.