Displaying led interface card status information, Figure 35. led status – Allied Telesis AT-S70 User Manual
Page 85
AT-S70 Management Software User’s Guide
85
Displaying LED Interface Card Status Information
The following procedure allows you to view the LED status displayed on
the LED interface card residing in Slot 19.
To display the LED status, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu, as shown in Figure 27 on
page 72, is displayed.
2. Select the LED interface card located in Slot 9 to view the status.
3. Press <Return>.
The LED Status, as shown in Figure 35, is displayed.
Figure 35. LED Status
4. Press <Esc> or select the “Return to ...” option at the bottom of the
menu, to save the settings and return to the previous menu.
LED Status
Converteon
Power Supply 1
ON
Power Supply 2
OFF
Fan Tray 1
ON
Fan Tray 2
ON
CPU Ready
ON
CPU Fault
ON
Master
ON
Return to Module Status and Configuration Menu...