Allied Telesis AT-WL2411 - Manual (Page 104)

AT-WL2411 Installation and User’s Guide
104
5. Click the down arrow on the right side of the Value field and enter the
two hex pair. The frame subtypes and their values are described
below.
DIX-IP-TCP-Port
Port value in hexadecimal.
DIX-IP-UDP-Port
Port value in hexadecimal.
DIX-IP-Protocol
Protocol number in hexadecimal.
DIX-IPX-Socket
Socket value in hexadecimal.
DIX-EtherType
Specify the registered DIX type in hexadecimal.
SNAP-IP-TCP-Port
Port value in hexadecimal.
SNAP-IP-UDP-Port
Port value in hexadecimal.
SNAP-IP-Protocol
Port value in hexadecimal.
SNAP-IPX-Socket
Socket value in hexadecimal.
SNAP-EtherType
SNAP type in hexadecimal. To filter on both SNAP type and OUI,
use advanced filters.
802.3-IPX-Socket
Socket value in hexadecimal.
802.2-IPX-Socket
Socket value in hexadecimal.
802.2-SAP
802.2 SAP in hexadecimal.
6. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.