Allied Telesis AT-WL2411 - Manual (Page 121)

AT-WL2411 Installation and User’s Guide
121
6. From the main menu, click Spanning Tree Settings. The Spanning
Tree Settings screen appears, as shown in Figure 53.
Figure 53 Spanning Tree Settings
7. In the Root Priority field, enter a number other than 0.
8. In the Secondary LAN Bridge Priority field, enter 0.
9. Click the down arrow on the right side of the Secondary LAN Flooding
field and choose Disabled.
10. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.
To configure the station radio (in the point-to-point bridge on the
secondary LAN):
1. From the main menu, click the link corresponding to the radio that
you are configuring.