Allied Telesis AT-WL2411 - Manual (Page 33)

AT-WL2411 Installation and User’s Guide
33
Installing the Access Point
You can install the AT-WL2411 horizontally on a desk or counter, or you
can install it vertically to a wall using the wall bracket that ships with it.
An optional cubicle bracket is also available for mounting the AT-
WL2411 on a cubicle wall.
Mounting The following instructions explain how to mount the AT-WL2411 using
the mounting bracket that ships with it.
To install the mounting bracket and AT-WL2411 on a sturdy surface in
accordance with local building codes, you need the following tools and
materials:
❑ Two #5 or M3 screws.
❑ Drill and drill bit appropriate for the mounting screws
❑ Screwdriver
To mount the AT-WL2411, do the following:
1. Use the mounting bracket as a template to mark the location of the
mounting holes on the mounting surface.
2. Drill the mounting holes.
3. Position the bracket on the mounting surface
4. Using the screws you provided, secure the bracket to the wall, as
shown in Figure 7.
Figure 7 Mounting
Hook
(2 places)
Mounting
bracket
Slot
(2 places)
2102 back
panel
Screw
(2 places)
Clip
2102G009.eps
AT-WL2411