Allied Telesis AT-WL2411 - Manual (Page 123)

AT-WL2411 Installation and User’s Guide
123
4. From the main menu, click Spanning Tree Settings. The Spanning
Tree Settings screen appears, as shown in Figure 55.
Figure 55 Spanning Tree Settings
5. In the Root Priority field, enter 0 or another number lower than the
root priority that is set in the master radio in the access point on the
primary LAN.
6. In the Secondary LAN Bridge Priority field, enter a number higher that
the bridge priority that is set in the master radio in the access point on
the primary LAN.
7. Click the down arrow on the right side of the Secondary LAN Flooding
field and choose Enabled.
8. Click Submit Changes to save your changes. To activate your changes,
click the Save/Discard Changes link in the menu bar and then click
Save Changes and Reboot. For help, see Saving Your Configuration
Changes on page 46.