Allied Telesis AT-FS203 - Manual (Page 3)

iii
Safety Warnings
Standards: This product meets the following standards
RFI Emission EN55022 Class A

1
Warning: In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.

2
Immunity EN50082-1 1997

3
Warning: This product requires shielded cables to comply with emission and immunity
standards. If it is used with unshielded cables, the user may be required to take measures
to correct the interference problem at their own expense.

4
Electrical Safety EN60950, UL1950, CSA 950

5
Laser EN60825

6
Warning Class 1 Laser product.

7
Warning Do not stare into the Laser beam.

8
At time of installation, the Fiber Optic Lasers comply with FDA Radiation Performance
Standard 21CFR Subchapter J, applicable at date of manufacture.
This is a “CLASS 1 LED PRODUCT” (AT-FS201, AT-FS202, AT-FS203 models)

9
Important: Appendix B contains translated safety statements for installing this
equipment. When you see the , go to Appendix B for the translated safety statement in
your language.
Wichtig: Anhang B enthält übersetzte Sicherheitshinweise für die Installation dieses
Geräts. Wenn Sie  sehen, schlagen Sie in Anhang B den übersetzten Sicherheitshinweis
in Ihrer Sprache nach.
Vigtigt: Tillæg B indeholder oversatte sikkerhedsadvarsler, der vedrører installation af
dette udstyr. Når De ser symbolet , skal De slå op i tillæg B og finde de oversatte
sikkerhedsadvarsler i Deres eget sprog.
Belangrijk: Appendix B bevat vertaalde veiligheidsopmerkingen voor het installeren van
deze apparatuur. Wanneer u de  ziet, raadpleeg Appendix B voor vertaalde
veiligheidsinstructies in uw taal.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Note: Modifications or changes not expressly approved of by the manufacturer or the
FCC, can void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.