Allied Telesis AT-S25 - Manual (Page 130)

Section II: Local and Telnet Mangement
130
Creating a Port-based or Tagged VLAN
This procedure explains how to create a new VLAN. A new VLAN
automatically spans all of the switches in a stack, making it unnecessary
for you to have to create the VLAN on each switch in a stack. Once you
have assigned the new VLAN a name and VID, you designate the ports of
the VLAN from the different switches in the stack.
To create a new port-based or tagged VLAN, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
The VLAN Menu in Figure 47 is displayed.
Figure 47 VLAN Menu
2. From the VLAN Menu, type 1 to select VLAN Definition.
The VLAN Definitions menu in Figure 48 is displayed.
Figure 48 VLAN Definition Menu