Viewing multicast mac addresses only – Allied Telesis AT-S25 User Manual
Page 152

Section II: Local and Telnet Mangement
152
Viewing
Multicast MAC
Addresses Only
To display only multicast MAC addresses, perform the following
procedure:
1. From the Main Menu, type 6 to select MAC Menu.
2. From the MAC Menu, type 3 to select Show all multicast MAC
addresses.
A window is displayed with all the multicast MAC addresses. An
example of the Show all multicast MAC addresses window is
shown in Figure 59.
Figure 59 Show all multicast MAC addresses Window
Table 12 lists the parameters used in the Show all multicast MAC
addresses window.
Table 12 Show all multicast MAC addresses Parameters
PARAMETER
DESCRIPTION
MAC Address
The multicast MAC address.
VlanID
The VID of the VLAN where the port is an untagged
member.
Module
The selected module.
Port List
The port list on the switch where the multicast MAC
address was learned.