Allied Telesis AT-S25 - Manual (Page 245)

AT-S25 Management Software User’s Guide
245
Modifying a VLAN
To modify a port-based or tagged VLAN, perform the following
procedure:
1. From the Home page, select Configuration.
2. From the Configuration menu, select Layer 2.
3. From the Layer 2 window, select the VLAN tab.
The VLAN window in Figure 101 on page 243 is displayed.
4. Click the button next to the name of the VLAN you want to modify.
5. Click Modify.
The View/Update VLAN configuration window is displayed in
Figure 103.
Figure 103 View/Update VLAN Window
Note
You cannot change the VID of a VLAN.
6. To change a VLAN’s name, click the Name text field and enter the new
name. A VLAN name can be from one to fifteen alphanumeric
characters. The name should reflect the function of the nodes of the
VLAN (for example, Sales or Accounting). The name can contain
spaces, but not special characters, such as asterisks (*) or exclamation
points (!). A VLAN must have a name.
A VLAN’s name must be unique in the stack. You cannot assign the
same name to two VLANs in the same stack.