Allied Telesis AT-S25 - Manual (Page 165)

AT-S25 Management Software User’s Guide
165
Show Port VLANs & Priorities
To display the port VLANs and priorities, perform the following
procedure:
1. From the Main Menu, type 2 to select VLAN Menu.
2. From the VLAN Menu, type 2 to select Configure Port Priorities.
The Configure Port Priorities menu in Figure 61 on page 163 is
displayed.
3. If necessary, use the M - Select another module option to change to
another switch module in the stack.
4. From the Configure Port Priorities window, type 2 to select Show Port
VLANs & Priorities.
The Show Port VLANs & Priorities window is displayed. An
example of the window is shown in Figure 62.
Figure 62 Show Port VLANs & Priorities Window
The PVID column displays the current PVID value for each switch
port.