Disabling and resetting stp, Disabling and resetting stp -11 – Allied Telesis AT-8550 User Manual
Page 105
AT-9108, AT-8518, AT-8525, and AT-8550 User’s Guide
6-11
Disabling and Resetting STP
To disable STP or return STP settings to their defaults, use the
commands listed in
.
Table 6-2 STP Disable and Reset Commands
Command
Description
delete stpd <stpd_name>
Removes an STPD. An STPD can only be removed if all VLANs
have been deleted from it. The default STPD, s0, cannot be
deleted.
disable stpd [<stpd_name> | all]
Disables the STP mechanism on a particular STPD, or for all
STPDs.
disable stpd port <portlist>
Disables STP on one or more ports. Disabling STP on one or
more ports puts those ports in forwarding state; all BPDUs
received on those ports will be disregarded.
unconfig stpd {<stpd_name>}
Restores default STP values to a particular STPD or to all
STPDs.