Allied Telesis AT-8202 - Manual (Page 27)

AT-8202 ATM Uplink User’s Guide
1-19
7. Enter 3 to select ATM/Trunk.
8. Enter the VLAN numbers you want to configure for trunking:
9. Enter the ATM/Trunk selection.
/PORTSERV/CONFIG >
CREATE 34
Select ATM Service to bind
1) ATM/LEC
2) ATM/PTOP
3) ATM/TRUNK
Enter an ATM service selection >
Enter an ATM service selection >
3
Virtual LAN Information:
VLAN VLAN IP Network Admin Operation Port
ID Description Address Status Status Membership
==== =============== ========== ======= ======= ==========
1 Default VLAN(#1 192.48.127.31 ENABLE ACTIVE 1-8
2 VLAN 2 1.1.1.1 ENABLE ACTIVE 9-16
Enter VLAN(s) number to configure (1..32) (<vlan#>,<vlan#-vlan#>)
: 1,2
Enter a ATM/TRUNK selection (c to cancel)> 1
Select a ATM/TRUNK service to bind
TRUNK# VCC Bind State Port Service#
===== === ========== =============
1 501 Unbound ------
Enter a ATM/TRUNK selection (c to cancel)> 1