Allied Telesis AT-8202 - Manual (Page 28)

Where to Go Next
1-20
10. Enter a port service description (optional), or press [ENTER]
:
11. Verify that trunking services have been created by using the
ATM/
SHOW/TRUNK
command.
You have successfully configured trunking.
Where to Go Next
After completing the procedures in this chapter, you are done with
basic ATM network configuration. You may refer to the next chapter
for a full description of the FORMULA 8200’s ATM commands.
For troubleshooting information, refer to the FORMULA 8200 User’s
Guide available from Allied Telesyn’s website at
www.alliedtelesyn.com.
Port Service Description (PS of ATM/TRUNK 1) :
Port service 1 is created for physical port 34
Port service 1 is bound with ATMTRUNK 1
Updating system/VLAN configuration....
/ATM/SHOW > trunk
TRUNK TRUNK PVC/ VC ATM
ID Description SVC Value Address
=== ======================== ==== ====== =========
1 TRUNK Instance 1 PVC 502