Allied Telesis AT-8202 - Manual (Page 43)

AT-8202 ATM Uplink User’s Guide
2-15
ATM/CONFIG/DELETE Commands
Syntax and (alias)
ATM/CONFIG/DELETE/CIP (dcip)
ATM/CONFIG/DELETE/LEC (dlec)
ATM/CONFIG/DELETE/PTOP (dptop)
ATM/CONFIG/DELETE/TRUNK (dtrunk)
Description
The ATM/CONFIG/DELETE commands allow you to delete services
that you have created using the ATM/CONFIG/CREATE command.
See the command examples for a brief description of these services.
ATM/CONFIG/DELETE/CIP <CIP Index> Example
This command deletes a CIP entity (a member of an LIS), where <CIP
Index> is the indicated index. If a CIP entity of that index does not
exist, the screen displays the error message,
No Such CIP .
All open virtual channel connections associated with that CIP entity
will be released first and their resources released. The CIP entity will
then be detached from the IP protocol before releasing all the
resources allocated for this CIP entity.
The display for ATM/CONFIG/DELETE/CIP <CIP Index> is only an
update message:
ATM/CONFIG/DELETE/LEC <LEC Number> Example
This command deletes a LEC (LAN emulation client), where <LEC
Number> is the LEC index. If a LEC of that index does not exist, the
screen displays the error message,
Invalid LEC Number . A
sample display of ATM/CONFIG/DELETE/LEC <LEC Number> is
shown in the following screen:
/ATM/CONFIG/DELETE > cip 2
Updating ATM configuration ...