Allied Telesis AT-8202 User Manual
Page 52
ATM/SHOW Commands
2-24
ATM/SHOW/CIP <CIP Index> Example
This command is a variant of
ATM/SHOW/CIP
, and specifies an
optional CIP index. It displays all the configured parameters of the
indicated CIP entity, if such an entity exists. If there is no CIP entity for
that index, the screen displays the error message,
No Such CIP
. A
sample display of
ATM/SHOW/CIP <CIP Index>
is shown below,
and parameters are described in Table 2-10.
/ATM/SHOW >
CIP 7
CIP 7 Display
CIP Index:
7
CIP Name:
CIP7
Description:
CIP Test 7
IP Address:
137.168.132.7
IP Subnet Mask:
255.255.255.0
Admin Status:
ENABLED
Connection Type:
SVC
Server ATM Address:
0x47000580ffe1000000f215149500204815149500
Mtu Size:
9180
RIP Mode:
Silent
Protocol State:
Active
ARP Server VCC:
57
Data VCC Connections:
69, 70