Allied Telesis AT-8202 - Manual (Page 46)

ATM/CONFIG/DISABLE and ENABLE Commands
2-18
ATM/CONFIG/DISABLE/TRUNK Example
This command disables a currently enabled trunk entry, but does not
delete it. The display for
ATM/CONFIG/DISABLE/TRUNK <TRUNK
Number> is only an update message:
ATM/CONFIG/ENABLE/CIP <CIP Index> Example
This command enables a currently disabled CIP entity, but does not
delete it. The display for
ATM/CONFIG/ENABLE/CIP <CIP Index> is
only an update message:
ATM/CONFIG/ENABLE/PTOP Example
This command enables a currently disabled PTOP entry. The display
for
ATM/CONFIG/ENABLE/PTOP <PTOP Number> is only an
update message:
ATM/CONFIG/ENABLE/TRUNK Example
This command enables a currently disabled trunk entry. The display
for
ATM/CONFIG/ENABLE/TRUNK <TRUNK Number> is only an
update message:
/ATM/CONFIG/DISABLE > TRUNK 1
Updating ATM configuration ...
/ATM/CONFIG/ENABLE > CIP 2
Updating ATM configuration ...
/ATM/CONFIG/ENABLE > PTOP 0
Updating ATM configuration ...
/ATM/CONFIG/ENABLE > TRUNK 1
Updating ATM configuration ...