Reset button – Allied Telesis AT-8324 User Manual
Page 24
Hardware Description
24
Reset Button
The Reset button on the front panel of the switch resets the switch. It
is primarily used for diagnostics or resetting the switch statistics
stored by the AT-S25 management software. You can also reset the
switch using the Omega management interface, as explained in the
AT-S25 Management Software User’s Guide. This guide is
available from the Allied Telesyn web site at
www.alliedtelesyn.com/
techhome.htm
.
Note
If it becomes necessary to reset a switch that is a part of a stack, you
must reset all of the switches in the stack. You cannot reset just one
switch in a stack. Additionally, you should reset the slave switches
first, then the master switch. For information on slave and master
switches, refer to Chapter 3, Installing the Switch.