Allied Telesis AT-S39 - Manual (Page 158)

Chapter 19: Download and Upload Commands
158
LOAD
Syntax
load method=tftp|xmodem|remoteswitch
type=image|config|bootloader
switchnumber=switches
Parameters
method Specifies the method of the download. Options are:
tftp Indicates that the download will
be performed using TFTP. To use
this option, you must have TFTP
server software on a network
node. The file to download onto
the switch must be stored on the
TFTP server.
xmodem Indicates that the download will
be from the management
workstation to the switch via a
local management session. This
option can be used only to
upgrade the switch on which the
management station is
connected. You cannot use this
option to upgrade other switches
in an enhanced stack.
remoteswitch Indicates that the download will
be from a master switch to other
switches in an enhanced stack.
This option must be used with the
SWITCHNUMBER option. (The
REMOTESWITCH option can only
be used from a master switch.)