Allied Telesis AT-S39 - Manual (Page 81)

AT-S39 Command Line Interface User’s Guide
81
DELETE SWITCH TRUNK
Syntax
delete switch trunk=name port=ports
Parameters
trunk Specifies the name of the trunk to be modified. (You
can enter any alphanumeric character for the name
and this command will still work. This is extremely
useful if you forgot the name you assigned the
trunk.)
port Specifies the ports to be removed from the existing
port trunk. The ports can be specified individually
(e.g., 1,4) or as a range (e.g.,1-2).
Description
This command removes ports from a port trunk.
Note
To completely remove a port trunk from a switch, see the DESTROY
TRUNK command.
Example
The following command removes Port 9 from a port trunk:
delete switch trunk=a port=9