Allied Telesis AT-S39 - Manual (Page 182)

Chapter 20: Command Reference
182
Broadcast Frame Control Command
SET SWITCH BROADCAST
set switch broadcast limit=limit
porttype=10Mbps|100Mbps|1000Mbps
Specifies the broadcast interval timer.
TACACS+ and RADIUS Commands
DISABLE AUTHENTICATON
disable authentication
Disables TACACS+ and RADIUS authentication on your switch.
ENABLE AUTHENTICATON
enable authentication
Enables TACACS+ and RADIUS authentication on your switch.
RESET AUTHENTICATON
reset authentication
Resets authentication on your TACACS+ and RADIUS switch.
SET AUTHENTICATON
set authentication method=[tacacs|radius]
[secret=string] [timeout=integer]
Selects the authentication protocol.
SHOW AUTHENTICATON
show authentication
Displays information about the authenticated protocols on the switch.
ADD TACACSSERVER
add tacacsserver ipaddress=ipaddress
order=integer [secret=string]
Adds the IP address of a TACACS+ server to your switch.