Allied Telesis AT-S39 - Manual (Page 89)

89
Chapter 11
STP Commands
❑ SHOW STP on page 90
❑ ACTIVATE STP on page 91
❑ ENABLE STP on page 92
❑ DISABLE STP on page 93
❑ SET STP on page 94
❑ SET STP PORT on page 96
❑ RESET STP on page 98
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
Refer to the AT-S39 User’s Guide for background information on
the Spanning Tree Protocol (STP).