Nikon 16-35mm-f-4G-AF-S-VR-Zoom-Nikkor - Manual (Page 21)

21
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Cz
Sk
Ck
Ch
Kr
compensate using Custom Setting #18 on the
camera body.
See instruction manual of the camera body for
more details.
Blank box means not applicable. Since type M
screen can be used for both macro photography at
a magnification ratio of 1:1 or above and for
photomicrography, it has different applications
than other screens.
Important
• For F5 cameras, only EC-B, EC-E, B, E, J, A, L
focusing screens are usable in Matrix Metering.
Lens care
• Be careful not to allow the CPU contacts to
become dirty or damaged.
• If the lens mount rubber gasket is damaged, be
sure to visit the nearest Nikon-authorized service
representative for repair.
• Clean lens surfaces with a blower brush. To remove
dirt and smudges, use a soft, clean cotton cloth or
lens tissue moistened with ethanol (alcohol) or lens
cleaner. Wipe in a circular motion from the center
to outer edge, taking care not to leave traces or
touch other parts of the lens.
• Never use organic solvent such as thinner or
benzene to clean the lens.
• NC filters are available to protect the front lens
element. The lens hood also helps to protect the
front of the lens.
• When storing the lens in its flexible lens pouch,
attach both the front and rear lens caps.
• When the lens is mounted on a camera, do not
pick up or hold the camera and lens by the lens
hood.
• When the lens will not be used for an extended
period of time, store it in a cool, dry place to
prevent mold and rust. Be sure to store the lens
away from direct sunlight or chemicals such as
camphor or naphthalene.
• Do not get water on the lens or drop it in water
as this will cause it to rust and malfunction.
• Reinforced plastic is used for certain parts of the
lens. To avoid damage, never leave the lens in an
excessively hot place.
Standard accessories
• 77mm Snap-on Front Lens Cap LC-77
• Rear Lens Cap LF-1
• Bayonet Hood HB-23
• Flexible Lens Pouch CL-1120
Optional accessory
• 77mm screw-on filters