Nikon WP-N1 - Manual (Page 48)

13
En
4 Soak the case in fresh water.
Reseal the case and leave it in a basin of fresh
water for two to three hours. Operate each of
the controls a few times to remove salt. If salt
drys on the controls, they may cease to func-
tion or their metal parts may rust, causing the
case to leak.
5 Wipe dry.
Dry the case thoroughly with a soft, dry cloth.
Do not use a cloth to which salt has adhered.
6 Let the case dry in the shade.
Leave the case out to dry in a shady, well-ven-
tilated area.
D Do Not Expose to Sunlight or Heat
Do not use a hair dryer or other heat source or place the case in direct sunlight. Heat could
cause the case or O-ring to deteriorate, resulting in leakage.
D Cleaning the Interior of the Case
Use a blower or a soft, dry cloth to remove liquid or other foreign objects from the interior of
the case. Do not use water, detergents, or chemical agents of any kind. Water can damage
the coating on the inside of the lens window.